Quote:
Originally Posted by Lazarus
Yea I plan on taking the Ed Bargy school at a couple TDs. I know one of the instructors and he recommended taking 1 or 2 TDs to get the jitters off.
|
Sounds like a good plan. Did you get my PM?
__________________
GS750C.....welded crank pins, Yoshimura 845cc 10.5:1 piston kit, Stage 1 cams, HD Tsubaki cam chain, manual CCT, Manley SST valves, Yoshimura kit springs and retainers w/collets, 5 angle seats, ports cleaned and matched, Mikuni 29mm smoothbores w/velocity stacks, Yoshimura hand bent race pipe, Martek electronic ignition, Barnett clutch and heavy duty springs, Lockhart oil cooler, D.I.D. aluminum rims w/8 guage SST spokes, Fox shocks, 10w fork oil w/spring spacers, Ferodo brake pads, fork brace, Kal-Gard Gun Kote, Piranha fiberglass1/4 fairing
|
Hybrid Mode
